Efficient Networks 107-0001-000 manual System securemode list, System securemode set, Security R

Efficient Networks® Router family	Chapter 4: System Commands
Command Line Interface Guide

Response

Command prompt.

system securemode list

Displays the current secure mode configuration values and the number of concurrent Telnet and SSH sessions allowed.

Mgmt Class

Security (R)

Input Format

system securemode list

Parameters

None

Response

A typical response is shown below.

Secure Mode is currently "ENABLED".

WAN interface is currently "UN-TRUSTED".

LAN interface is currently "TRUSTED".

System CLI limit set to 7.

system securemode set

Enables and disables secure mode. When secure mode is enabled, management access of the system is allowed only through secure channels for untrusted interfaces. For more information, refer to ”Secure Mode Access” on page 5-18of the Technical Reference Guide.

Mgmt Class

Security (R/W)

Input Format

system securemode set <enable disable>

Efficient Networks® Page 4-47