Efficient Networks 107-0001-000 manual Dsp provision

Efficient Networks® Router family	Chapter 13: Voice Commands
Command Line Interface Guide

dsp provision

Sets the signalling the method in which phone lines (or trunks) are seized and released.

Mgmt Class

Voice (R/W)

Input Format

dsp provision <port> <loop ground>

Parameters

***	When entered with no parameter, the current configuration is dis-
	played
<port>a	Voice port to configure.b
loop	Sets voice signalling method to loop start
ground	Sets voice signalling method to ground start

aInteger, 1 - 4 (or 1 - 8 for 8-port IADs)

bWhen command is entered with <port> and no method <loop ground>, the current port configuration is displayed.

Example

The following command example will configure voice port 4 for ground start.

-> dsp provision 4 ground

Response

Typical response when entered with no parameters:

-> dsp provision

[ 1]: Loop Start

[ 2]: Loop Start

[ 3]: Loop Start

[ 4]: Loop Start

Typical response when configuration has been changed:

-> dsp provision 4 ground

[ 4]: Ground Start

Efficient Networks® Page 13-5