Efficient Networks 107-0001-000 manual IKE/IPSEC Commands

Efficient Networks® Router family	Chapter 12: IKE/IPsec Commands
Command Line Interface Guide

CHAPTER 12

IKE/IPSEC COMMANDS

The commands in this section are used to manage the security features Internet Key Exchange (IKE) and Internet Protocol Security IPSec). For additional information on IKE and IPSec, see Chapter 5, System Security.

The commands found in this section include:

Table 12-1: Internet Key Exchange Command Listing

Command	Function
ike ipsec ?	List the supported IKE, IPSEC and IKE IPSEC key-
	words.
ike commit	Defines the remote router entry as a PPPoE re-
	mote entry.
ike flush	Closes a currently active PPPoE session.
ike ipsec policies add	Lists information about the currently active PPPoE
	sessions.
ike ipsec policies delete	Deletes an existing IPSec policy.
ike ipsec policies disable	Disables an IPSec policy.
ike ipsec policies enable	Enables an IPSec policy.
ike ipsec policies list	List the IPSec policies.
ike ipsec policies set dest	Defines a destination address filtering parameter value
	for an IPSec policy.
ike ipsec policies set dest-	Defines a destination port filtering parameter value for
port	an IPSec policy.
ike ipsec policies set inter-	Defines an interface filtering parameter value for an IP-
face	Sec policy
ike ipsec policies set mode	Defines the mode filtering parameter value for an IPSec
	policy

Efficient Networks® Page 12-1