Efficient Networks 107-0001-000 manual User add class

Chapter 15: User Commands	Efficient Networks® Router family
	Command Line Interface Guide

user add class

Configures the managements class with read-only or read-write privileges for the specified user. Multiple class and privilege pairs may be specified for a user. To view the current management class(es) for a user, use the command user list.

NOTE:

If a user account currently has read-write privilege for a management class, adding the same user class with a read-only privilege will not revoke the read-write privilege. To revoke the read-write privilege, use the user delete class command, then re- establish the management class with read-only access.

Mgmt Class

Admin (R/W)

Input Format

user add class <class> read write <user_name>

Parameters

<class> Must be one of the following:

	admin	Adds Admin management class for the specified user ac-
		count.
	voice	Adds voice management class for the specified user account.
	network	Adds network management class for the specified user ac-
		count.
	system	Adds system management class for the specified user ac-
		count.
	security Adds security management class to the specified user ac-
		count.
	debug	Adds debug management class to the specified user account.
read	Class privileges are granted on a read-only access.
write	Class privileges are granted for read and write access.

<user_name>a User account to which the management class is added.

aASCII string, 6 - 32 characters. User name is case sensitive.

Response

A typical response is shown below.

-> user add class security write Admin1

Added "SECURITY-WRITE" management class for user "Admin1"

Page 15-4 Efficient Networks®