Efficient Networks 107-0001-000 manual System ?, System addbootpserver ipaddr

Efficient Networks® Router family	Chapter 4: System Commands
Command Line Interface Guide

system ?

Lists the supported keywords. To see the syntax for a command, enter the command followed by a ?.

Mgmt Class

All (R)

Input Format

system ?

Parameters

None

Response

A listing of all the supported system commands and keywords with a brief description of their function.

system addbootpserver

Adds an address to the BootP server list. (The BootP server list is also the DHCP relay list.)

While the BootP server list has at least one address, the router disables its own DHCP server and, instead, forwards all DHCP/BootP requests to all servers in the list. It forwards every reply received from any of the servers in the list to the appropriate LAN. To read about BootP service, see ”BootP Service” on page 4-15of the Technical Reference Guide.

Addresses can also be added to the list using the dhcp addrelay command. To remove an address from the list, use the dhcp delrelay command.

To see the current BootP server address, enter the command dhcp addrelay or system addbootpserver with no parameters. To remove a BootPserver address, use the command dhcp delrelay or system delbootpserver.

Mgmt Class

Network (R/W)

Input Format

system addbootpserver <ipaddr>

Efficient Networks® Page 4-5