![](/images/new-backgrounds/1300315/30031573x1.webp)
Power Management
AC Recovery | Determines what happens when AC power is restored to the computer. | |
|
| |
| Sets the computer to automatically turn on. Choices are every day or every Monday through Friday. | |
Auto Power On | The default setting is Off. | |
| This feature does not work if you turn off your computer using a power strip or surge protector. | |
|
| |
| Sets time to automatically turn on the computer. | |
Auto Power | Time is kept in a | |
Time | the numbers, or type numbers in both the date and time fields. | |
| This feature does not work if you turn off your computer using a power strip or surge protector. | |
|
| |
Suspend Mode | The options are S1, a suspend state where the computer is running in a | |
reduced or turned off for most components, however, system memory remains active. | ||
| ||
Maintenance |
| |
|
| |
SERR DMI | Some graphics cards require that the SERR DMI message be disabled. The default setting is On. | |
Message | ||
| ||
|
| |
Load Defaults | This setting restores the computer's | |
|
| |
Event Log | Displays the system event log. | |
|
| |
POST Behavior |
| |
|
| |
Fastboot | When set to On (default), your computer starts more quickly because it skips certain configurations and tests. | |
|
| |
| This option involves the rightmost bank of keys on your keyboard. When set to On (default), this option activates the numeric and | |
Numlock Key | mathematical features shown at the top of each key. When set to Off, this option activates the | |
| bottom of each key. | |
POST Hotkeys | This option allows you to specify the function keys to display on the screen when the computer starts. | |
|
| |
Keyboard | This option enables or disables keyboard error reporting when the computer starts. | |
Errors | ||
| ||
|
| |
|
|
Boot Sequence
This feature allows you to change the boot sequence for devices.
NOTICE: If you modify any boot sequence settings, save the new settings to avoid losing the changes.
Option Settings
•Diskette Drive — The computer attempts to boot from the floppy drive. If the floppy disk in the drive is not bootable, if no floppy disk is in the drive, or if there is no floppy drive installed in the computer, the computer generates an error message.
•Hard Drive — The computer attempts to boot from the primary hard drive. If no operating system is on the drive, the computer generates an error message.
•CD Drive — The computer attempts to boot from the CD drive. If no CD is in the drive, or if the CD has no operating system, the computer generates an error message.
•USB Flash Device — Insert the memory device into a USB port and restart the computer. When F12 = Boot Menu appears in the
NOTE: To boot to a USB device, the device must be bootable. To make sure that your device is bootable, check the device documentation.
Changing Boot Sequence for the Current Boot
You can use this feature, for example, to restart your computer to a USB device such as a floppy drive, or memory key.
1.If you are booting to a USB device, connect the USB device to a USB connector (see "Front View."
2.Turn on (or restart) your computer.
3.When F2 = Setup, F12 = Boot Menu appears in the
If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop. Then shut down your computer through the Start menu and try again.
The Boot Device Menu appears, listing all available boot devices.
4.Select a device and press <Enter>.
For example, if you are booting to a USB memory key, highlight USB Flash Device and press <Enter>.