Efficient Networks 107-0001-000 manual System blocknetbiosdefault, System backup successrate

Chapter 4: System Commands	Efficient Networks® Router family
	Command Line Interface Guide

To see the current success rate values, use the system list command. For more information about success rates and Dial Backup, see ”Ping Interval, Number of Samples, and Success Rate” on page 6-13of the Technical Reference Guide.

Mgmt Class

Network (R/W)

Input Format

system backup successrate <percentage> [<group>]

Parameters

<percentage>a Minimum success rate required during a ping test of the addresses in the group.

<minutes>b Optional, number of a group.

aInteger, 0 - 99 (50)

bInteger, 0 - 65535 (0)

Examples

The following command changes the success rate to 75% for addresses in group 0.

-> system backup successrate 75

The following command disables the pinging of addresses in group 1.

-> system backup successrate 0 1

Response

Command prompt.

system blocknetbiosdefault

The router can block all NetBIOS and NetBUI requests from being sent over the WAN. This command sets the default value used when a remote router entry is defined.

The command remote blocknetbios can change the NetBIOS setting for a specific remote router. To see the current NetBIOS default, use the system list command.

Mgmt Class

Security (R/W)

Page 4-26 Efficient Networks®