Efficient Networks 107-0001-000 manual Eth vrrp clear password vrid port#, Eth clear password

Efficient Networks® Router family	Chapter 5: Ethernet Interface Commands
Command Line Interface Guide

eth vrrp clear password

Clears the password in a VRRP attribute record for the VRID (virtual router ID). To see the current password, use the command eth vrrp list. To set a new password, use the command eth vrrp set password. For more information,see “VRRP Backup” on page 6-16of the Technical Reference Guide.

NOTE:

If the VRRP attribute record has no password, no VRRP authentication is performed.

NOTE:

If you clear the password for one VRRP router, you must clear the password for every router for that VRID on the LAN. For example, if VRID 7 is defined in routers A, B, and C in the LAN and you clear the password for router A, you must clear the password for routers B and C as well.

NOTE:

This command takes effect immediately, but changes must saved if it is to persist after a restart the interface or reboot of the router.

Mgmt Class

Network (R/W)

Input Format

eth vrrp clear password <vrid> [<port#>]

Parameters

<vrid>a	Virtual router ID.
<port#>b	Physical Ethernet interface (port) number.

aInteger, 1 - 255

bThe default is 0; the parameter may be omitted if the router has only one port.

Example

This command example clears the password for VRID 7 using default port 0.

-> eth clear password 7

Response

Command prompt.

Efficient Networks® Page 5-41