Efficient Networks 107-0001-000 manual System backup disable, System backup delete all all

Chapter 4: System Commands	Efficient Networks® Router family
	Command Line Interface Guide

The following command clears all addresses from the list.

-> system backup delete all all

Response

Command prompt.

system backup disable

Disables the Dial Backup option in the router.

NOTE:

Because Dial Backup uses the console port, you cannot access the command line via the console port while Dial Backup is enabled. You must use the Web GUI interface or a Telnet session to disable Dial Backup.

NOTE:

If you do not use the save command to save this change, Dial Backup is only temporarily disabled and it is re-enabled at the next reboot. Temporarily disabling Dial Backup stops Dial Backup, but it does not change the use of the console port. To disable Dial Backup across reboots, see ”Disabling and Re-Enabling Dial Backup” on page 6-15of the Technical Reference Guide.

To re-enable the Dial Backup option, use the system backup enable command. For more information about Dial Backup, refer to ”Dial Backup” on page 6-7of the Technical Reference Guide.

Mgmt Class

Network (R/W)

Input Format

system backup disable

Parameters

None

Response

Command prompt.

Page 4-20 Efficient Networks®