English
32
Sound
Before you begin:
You must set Home in Location. ➠ p.38
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into Standby mode.
1 Press MENU/E�IT and use ▲▼◄► to select Setup, then press
OK.
2 Use ▲▼ to select Sound, then press OK.
Picture Auto sound Personal
Sound Equalizer Start now
Features Balance
Installation Digital audio language English
Software SRS TruSurround XT On
AVL Off
TV speakers On
Delta volume
3 Use ▲▼◄► to select the item you want to adjust, then press
OK.
The following sound settings can be congured. Depending on the
format of the broadcasting, some sound settings are not available.
Autosound
to select the desired setting
(Personal, Standard, Vivid, Sports, Movie,Musicand
News)
When you adjust the following settings (Equalizer,
SRSTruSurround�Tand AVL), Personalwill be set
automatically.
Adjust the tonal quality for each frequency.
Equalizer
Cursor◄Cursor►
to adjust the each level of tonal quality
Press BACK to go back to the previous menu.
Adjust the speakers to suit your listening preference.
Balance Cursor◄Cursor►
to adjust the balance of the right and left speakers
DigitalTVoperation
You can select the Audio language while your TV is receiving the Digital
broadcasting.
Digitalaudio
language
to select the language according to your preference.
(It differs depending on the program.)
Analog/CableTVoperation
You can select Main or SAP while your TV is receiving the Analog
broadcasting that has the SAP (Second Audio Program).
(It differs depending on the program.)
Alternateaudio Main to output main-audio
SAP to output second-audio program
Analog/CableTVoperation
When you set to Main in Alternateaudio above, you can select Mono
or Stereo if the Analog broadcasting is sending the MTS (Multichannel
television sound).
Mono/Stereo Mono to output mono-audio
Stereo to output stereo-audio
This selects sound modes for more spatial or surround sound
reproduction.
SRSTruSurround
�T
Off to set SRS TruSurround XT® to Off
On to set SRS TruSurround XT® to On
This function keeps a constant loudness differential between the TV
commercials and the programs.
AVL
Off to remove the auto volume leveling
On to reduce volume differences between the
TV commercials and the programs
You can select the Audio Output from the unit’s speakers or not. If your
amplier is HDMI link function compatible and connected by an HDMI
cable to this unit, some sound operations such as volume up can be
changed by using this unit’s remote control. Make sure MasterEasyLink
is set to On. ➠ p.39
TVspeakers
Off not to output sound from the unit’s
speakers
On to output sound from the unit’s speakers
Speakers
EasyLink
to control Audio Output from your
connected EasyLink Compliant Devices
with VOL+/−by using this unit's remote
control.
If a channel or Input device is too loud or too soft, navigate to that
channel or Input device.
Deltavolume
Cursor◄Cursor►
to set a negative delta
volume level as per your
personal preferences
to set a positive delta
volume level as per your
personal preferences
Note
• Alternateaudio and Mono/Stereo are not available when you watching TV programs
with a cable box or satellite set-top box connected through an HDMI cable or
Component Video cables.