Philips Wireless MediaConnect
(Available for 32PFL4907 & 26PFL4907only)
You can enjoy your TV as a PC monitor wirelessly using your home network. Make sure you download the Philips Wireless MediaConnect software and install it on your PC before you perform the steps below.
Install Philips Wireless MediaConnect
1Display Setup using Home menu and use ▲▼ to select Software, then press OK.
2 Use ▲▼ to select MediaConnect code, then press OK.
• Write down the
3 Start your Internet browser on your PC and open the Philips Wireless MediaConnect download page at www.wifimediaconnect.philips.com/
On the website, you can check the necessary PC system requirements.
4 Enter the 12 digit code you wrote at step 2.
5Click the “Download now” button to download the free Philips Wireless MediaConnect software.
6Once downloaded, start the file “Philips Wireless MediaConnect_ setup.exe”. Follow the instructions on the screen to complete software installation.
Using Philips Wireless MediaConnect
1Launch Philips Wireless MediaConnect on your PC first.
•Select “Start projecting” with right click on the 
in the system tray.
•The start up screen for Philips Wireless MediaConnect will be displayed and the unit searches for an available PC that is running Philips Wireless MediaConnect software.
Once connected, the Philips Wireless MediaConnect software will encode and stream the screen of your PC as a video along with audio.
Depending on your computer and network configuration, there will be a delay between your PC screen and the TV but the
Philips Wireless MediaConnect Help
To read the Philips Wireless MediaConnect Help, right click the program icon in the notification tray of the PC and select Help.
Specifics
You can project high definition (HD) or standard definition (SD) video, depending on the processing power of your PC. For smooth playback of HD video, please use a hardware accelerated video player on your computer. A hardware accelerated video player uses the graphics adapter of your PC to render HD video rather than the processor. This frees up the processor for Philips Wireless MediaConnect video encoding.The content protection on most
PC requirements
Windows XP,Windows Vista,Windows 7,
Mac OS X 10.6 or above (PC only)
Minimum PC requirements
•Intel® Core™ 2 Duo 1.8GHz
•512MB RAM
•IEEE 802.11n Recommended PC requirements
•Intel® Core™ 2 Duo 2.1GHz
•1GB RAM
17
View photos, play music and watch videos using DLNA
On your TV you can play video, music and photo files stored on DLNA certified home media servers connected to your home network. In order to use this feature, you must connect this unit to the Internet.
It is recommended that files to be played back in this unit are recorded under the following specifications:
<MP3> |
| |
• | Sampling frequency | : 32kHz or 44.1kHz or 48kHz |
• | Constant bit rate | : 32kbps - 320kbps |
<JPEG> |
| |
• | Upper limit | : 16Mpixel |
<MPEG> |
| |
• | Playable codec | : MPEG1, MPEG2 |
•Maximum size of a video : 1920 x 1080
• Audio type | : AC3, MPEG1 audio layer 3 (MP3), |
| MPEG1 audio layer 2, LPCM |
Note
••A maximum of 1,023 folders or files can be recognized.
••For the home server list, maximum of 16 servers can be displayed.
••The 10th and deeper hierarchies cannot be displayed.
••Unplayable files in the home server will not be displayed in the file list.
••For some files, playback is not available even if displayed in the file list.
••In order to play back the contents in home servers, the player and the servers must be connected to the same access point.
••Compatibility and available playback function may differ depending on the home server.
••Video files with unsupported audio format will be skipped.
••The quality of the playback picture or audio differs depending on your network condition.
Before using DLNA
Follow the procedure below before using DLNA. 1 Connect this unit to the Internet.
Connecting the TV to the Internet using an Ethernet cable ➠ p. 46 or Connecting theTV to the Internet using a wireless LAN ➠ p. 47
• Broadband Internet connection of 8Mbps or faster is required.
2 Set up the necessary network connection settings. Network ➠ p. 40
Using DLNA
1 Start DLNA home media servers in your home network.
• For details, refer to the instruction book of the DLNA certified device.
2 Press MENU / EXIT on the remote control.
3 Use ▲▼◄► to select Browse PC.
• This unit will start loading the home server list.
4 After loading, home server list will appear. Select a home server you want to access, then press OK.
English
