Samsung SP-50L3HR, SP-56L3HR, SP-61L3HR 2

Connecting a DTV Set-Top Box

Connecting to Y,PB,PR

1Connect a set of audio

cables between the

COMPONENT (1 or 2)

AUDIO (L,R) IN jacks on the

TV and the AUDIO OUT

jacks on the Set-Top Box.

2Connect a set of video

cables between the

COMPONENT (1 or 2)

VIDEO (Y, PB, PR) IN jacks

on the TV and VIDEO

(Y/PB/PRor Y/CB/CR) OUT

jacks on the Set-Top Box.

Note: For an explanation of

Component video, see your

Set Top Box owner's

manual.

Connecting to DVI (Digital Visual Interface)

1Connect a set of audio

cables between the DVI

AUDIO (L,R) IN jacks on the

TV and the AUDIO OUT

jacks on the Set-Top Box.

2Connect a video cable

between the DVI IN jack on

the TV and the DVI OUT

jack on the Set-Top Box.

Connections

English - 22

TV Rear Panel

DTV Set Top Box

Incoming

Cable or

Antenna

TV Rear Panel

DTV Set Top Box

Incoming

Cable or

Antenna

2_BP68-00433A-00(14~23) 5/31/05 11:34 AM Page 22

Downloaded from www.Manualslib.com manuals search engine

Contents

Main Owners Instructions Table of Contents Page Page Page Replacing the Lamp Page List of Features Accessories Side Panel Buttons Side Panel Jacks Front Panel LED Indicators Rear Panel Jacks Remote Control Installing Batteries in the Remote Control 2 1 3 Page Page Connecting VHF and UHF Antennas 1 Antennas with 300-ohm Flat Twin Leads 2 Antennas with 75-ohm Round Leads Separate VHF and UHF Antennas 1 2 Connecting Cable TV and VCR 1 Cable without a Cable Box 2 1 Cable with a Cable Box that Descrambles All Channels Connecting a Cable Converter Box Connecting a Cable Converter Box and a VCR Connecting a Camcorder 2 3 Connecting a DVD Player 2 Connecting to Y,PB,PR Connecting to Audio and Video Jacks Connecting a DTV Set-Top Box 2 Connecting to Y,PB,PR Connecting to DVI (Digital Visual Interface) Connecting to R,G,B 1 Connecting to HDMI (High Definition Multimedia Interface) Page Page Viewing the Menus 3 Viewing the Display Turning the TV On and Off Viewing the Menus and On-Screen Displays Selecting the Menu Language 1 Selecting the Antenna Input 2 Memorizing the Channels Selecting the Video Signal Source Storing Channels in Memory (Automatic Method) 2 Adding and Erasing Channels 1 Changing Channels Using the Channel Buttons Using the Number Buttons Using the Previous Channel Selecting Your Favorite Channels To Store Your Favorite Channels: To View Your Favorite Channels: Scanning the Channels Labeling the Channels 3 4 Picture Control 4 Customizing the Picture Resetting the Picture Settings to the Factory Defaults Using Automatic Picture Settings 1 2 3 Sound Control Adjusting the Volume Using the MUTE Button Customizing the Sound 3 Using Automatic Sound Settings 2 1 Setting the Clock 3 Absent Power Off Setting the Timers 1 Setting the On/Off Timer 5 4 3 Setting the Sleep Timer Viewing an External Signal Source Setting the Signal Source Assigning Names to External Input Mode Freezing the Current Picture Remote Control VCR/DVD Buttons Page Page Customizing Your Remote Control Setting Up Your Remote Control to Operate Your VCR (Cable box or DVD player) 1 2 3 4 6 5 Page Fine Tuning Channels 1 4 LNA (Low Noise Amplifier) Selecting the Color Tone select Color Tone, then Not available in the Cinema picture mode. select Cool2, Cool1, Normal, Warm1, or Warm2, then press the Changing the Picture Size 2 Digital Noise Reduction select Digital NR, then DNIeTM (Digital Natural Image engine) Setting the My Color Control Mode Using the Easy Control Menu Custom Settings Resetting the My Color Control Colors to the Factory Defaults 4 Setting the Film Mode Film mode is supported in 480i only. select Film Mode, then Viewing Picture-In-Picture Activating the PIP Selecting an External Source Swapping the Sub Picture and Main Picture select Swap, then press The sub picture appears in the main picture, and vice versa. The swapping doesnt support ANT 2 IN, Component1, Component2, PC, DVI and HDMI. Changing the Size of the Sub Picture select Size, then press the select a size you want, then Changing the Location of the Sub Picture select Position, then press select a position you want, then press the ENTER button. Changing the Channel of the Sub Picture Selecting the Sound Source Setting the SRS TSXT Choosing a Multi-Channel Sound (MTS) track Auto Volume English - 67 Enjoying the Sound of External Speakers select Sound, then press select Internal Mute, then press the ENTER button. 4_BP68-00433A-00(46~67) 5/31/05 11:37 AM Page 67 2 3 4 5 Viewing Closed Caption Information 4 5 6 Setting the Blue Screen Mode English - 72 select Setup, then press select Blue Screen, then select On or Off, then Setting The On/Off Melody A melody sound can be set to come on when the TV is powered On or Off. select Melody, then press select On, then press the Press the EXIT button to exit the menu. Using the Color Weakness Enhancement Feature Page Using Your TV as a Computer (PC) Display How to Connect Your PC to the TV Setting up Your PC Software (Windows only) 2 3 4 5 Display Modes Adjusting the Picture Quality 5 Changing the Picture Position 5 After connecting the TV to your PC, adjust the position of picture if it is not well-aligned. English - 80 select PC, then press the select Position, then press Adjusting the Picture Quality and Position Automatically Initializing the Picture Settings You can replace all picture settings with the factory default values. English - 82 select PC, then press the select Recall, then press 3 Page Page Troubleshooting Appendix Possible Solution Problem Cleaning and Maintaining Your TV Placement Liquids Cabinet Temperature