
Software Upgrading | Basic Configuration and Setup |
|
|
|
|
Optional Commands
SET iproute - Configures an IP route within the switch, usually for remote hosts for network management, etc. Use this command when the network that you want to connect to is either connected to an ATM port or an Ethernet port. For more information, see the “SET iproute (Privileged Command)” section of the ATM Switch Command Manual.
SET nms - If an NMS system is installed, this command allows up to 4 remote NMS systems to be installed. Options for this command allow you to set community name access and read/write privileges.
DIAGNOSIS all - Performs a self test on all the components within the switch. This command takes a few minutes to execute and displays the results after completion.
DISPLAY configuration all - Displays the current configuration defined within the switch. There are a number of default settings predefined within the switch. You may save time during configuration and setup by looking at the default configuration and determining what items are already configured to the desired setting.
Software Upgrading
See "Upgrading Software" on page
Centillion 1200N ATM Switch User Manual | |
| NTP |