Upgrading Software | Modifications |
|
|
|
|
FLASH_UP Mode
Load the software from the ATA card mounted in the PCMCIA slot #0. The office data is loaded from the ATA card mounted in the PCMCIA slot #1. Office data is not saved.
Figure 10-24: FLASH_UP Mode
Procedure
1.Turn off the power of the ATM Switch.
2.Insert the new version ATA card in PCMCIA slot #0 and the ATA card containing the office data you wish to continue to use in PCMCIA slot #1.
3.Turn on the power of the ATM Switch and start the boot monitor.
4.Set the boot mode as follows:
BOOT# SET boot flash_up
5.End the boot monitor:
BOOT# QUIT
Centillion 1200N ATM Switch User Manual | |
| NTP |
