Modifications | Upgrading Software |
|
|
|
|
INITIALIZE_SAVE Mode
Load the software from the Ether network server connected via the LAN card mounted in the PCMCIA slot #1. The office data is included in the software in the initial setting status. After loading, the software and office data are saved to the ATA card mounted in PCMCIA slot #0 and reloaded in the main memory.
Figure 10-27: INITIALIZE_SAVE Mode
Procedure
1.Turn off the power of the ATM Switch.
2.Insert into PCMCIA slot #0 the ATA card to which to save the software and into PCMCIA slot #1 the LAN card connected to the Ether network.
3.Turn on the power of the ATM Switch and start the boot monitor.
4.Set the IP address of the ATM Switch.
BOOT# SET local ***.***.***.***
5.Set the server's IP address and boot file name.
BOOT# SET server ***.***.***.*** *****.bootfiles
6.Set the IP address of the default router.
BOOT# SET route ***.***.***.***
7.Set the boot mode as follows:
BOOT# SET boot initialize_save
8.End the boot monitor.
BOOT# QUIT
Centillion 1200N ATM Switch User Manual | |
NTP |
|
