S

Glossary

 

 

 

 

Segment

A single ATM link or group of interconnected ATM links of an ATM connection.

SEL

Selector: A subfield carried in SETUP message part of ATM endpoint address Domain specific Part (DSP) defined by ISO 10589, not used for ATM network routing, used by ATM end systems only.

Semipermanent Connection

A connection established via a service order or via network management.

SES

Severely Errored Seconds: A unit used to specify the error performance of T carrier systems. This indicates a second containing ten or more errors, usually expressed as SES per hour, day, or week. This method gives a better indication of the distribution of bit errors than a simple Bit Error Rate (BER). Refer also to EFS.

SES

Source End Station: An ATM termination point, which is the source of ATM messages of a connection, and is used as a reference point for ABR services. Refer to DES.

SF

SuperFrame: A DS1 framing format in which 24 DS0 timeslots plus a coded framing bit are organized into a frame which is repeated 12 times to form the superframe.

SFIT

SDH Frame Interface Termination

Shaping Descriptor

Signal: An electrical wave used to convey information.N ordered pairs of GCRA parameters (I,L) used to define the negotiated traffic shape of a connection.

SIO

Scientific or Industrial Organization

SIPP

SMDS Interface Protocol: Protocol where layer 2 is based on ATM, AAL and

DQDB. Layer 1 is DS1 and DS3.

B-68

Centillion 1200N ATM Switch User Manual

 

NTP 297-8103-903

Page 230
Image 230
Panasonic 1200N manual Sel, Ses, Sfit, Sio, Sipp