Basic Configuration and Setup | Ongoing Configuration |
|
|
|
|
Ongoing Configuration
Interface, ILMI, This section describes how to configure different interface types and PVCs.
and SVC
Signaling | Interface Configuration |
|
|
| |
| The SET INTERFACE command sets the type of interface, such as Private UNI, | ||||
| Private NNI, or Public UNI. Each interface complies with ATM Forum | ||||
| specifications and has its own unique applications. If you want to keep the default | ||||
| interface configuration, you can skip this section. |
|
| ||
| 1. Display the current configuration of the interfaces. |
| |||
| DISPLAY interface |
|
|
| |
| Line Interface | Physical layer | Forum/ITU Unassigned/Idle | Valid | |
|
|
|
| VPI/VCI | |
| 00 pri_UNI | <dependent on card type> | ATM Forum Unassigned | 6/8 | |
| 01 pri_UNI | <dependent on card type> | ATM Forum Unassigned | 6/8 | |
| 02 pri_UNI | <dependent on card type> | ATM Forum Unassigned | 6/8 | |
| 03 pri_UNI | <dependent on card type> | ATM Forum Unassigned | 6/8 | |
To display only a particular interface, use the following command:
DISPLAY interface [slot number][port number]
The default response should look something like this:
Line: | 00 |
Interface type | pri_UNI |
Physical layer: | <dependent on card type> |
Forum/ITU: | ATM Forum |
Unassigned/Idle: | Unassigned |
Valid VPI: | 6 |
Valid VCI: | 8 |
Because the default configuration is already active and in service, you must remove all connections before changing a port configuration.
2.Suspend SVC activity for the port that you are modifying.
SET svcline [slot number][port number] [vpi number] suspend
Example: SET SVCline 23 0 suspend
3.Delete the ILMI signaling PVC connection.
DELETE ilmi [slot number][port number] [vpi number]
This command deletes the ILMI PVC connection for the specified port. The default VPI/VCI of ILMI is 0/16.
Example: DELETE ILMI 23 0
Centillion 1200N ATM Switch User Manual | |
NTP |
|
