Panasonic 1200N manual Carrying the ATM Switch

Moving the Equipment Modifications

When carrying the main unit, be sure to securely hold the bottom of the main unit as shown in Figure 10-1.

		Figure 10-1: Carrying the ATM Switch
	Be sure to hold the specified positions. Holding positions other than the specified
NOTE
	positions may cause a failure.
	4.	Connect the power cable and the communication cable. Refer to "Connecting
		the Power Cable" on page 7-15.
	5.	Connect the MAT to ATM Switch with RS-232C cable. Refer to "MAT
		Connection" on page 7-14.
	6.	Turn on the MAT's power switch and set the communication parameters. Refer
		to "Setting the MAT" on page 9-6.
	7.	Turn on the ATM Switch's power switch. Check the messages displayed on the
		MAT screen to make sure that the move did not cause a problem with the ATM
		Switch. Refer to "ATM Switch Alarms" on page 7-18.
	8.	Enter the alarm message display command from the MAT to make sure that
		there is no hardware error. Refer to "ATM Switch Alarms" on page 7-18.

10-2	Centillion 1200N ATM Switch User Manual
	NTP 297-8103-903