Roland RG-7 manual Connecting a Television, Switching Television Formats, Value PAL, Ntsc

Chapter 2. Using the RG-7 with an External Display or Television

Connecting a Television

fig.

RG-7’s Jack Panel	Video Cable
Video Out jack	(Sold separately)

Television

■Making the Connections

*To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.

1 Turn off the power to the RG-7 and the television to be connected.

2 Use a video cable (sold separately) to connect the RG-7’s Video Out jack with the television’s video input jack.

3 Turn on the power to the RG-7.

4 Turn on the power to the television.

■Switching Television Formats

If you find that the image quality of the television is poor, try switching the television

	format.
1.	Press the [Function] (Exit) button so the indicator is lit.
2	Press the [Song] (Select -) button or [		] (Select +) button to display
	the EXT DISPLAY screen.
3.	Press the [	] (Value -) button or [	] (Value +) button to select the

television format.

fig.

Value: PAL, NTSC

4. Press the [Function] (Exit) button so the indicator goes out.

When you press the [DISPLAY] button on the remote control, the content being displayed switches to the television.

To change the settings indicated in the display (Song Select screen → Lyrics screen → Slide show → Notation → Song Select screen...), refer to “Selecting What is To Be Displayed on the External Display or Television” (p. 50).

NOTE

You cannot display information or images with a television when an external display is connected to the Ext Display connector. To use an television, first disconnect the external display from the Ext Display connector, then connect the television.

You can save this setting in the

RG-7’s memory using the

Memory Backup function (p.

72).

49