Roland Changing the Display Settings, Using the RG-7 with an External Display or Television

Chapter 2. Using the RG-7 with an External Display or Television

3 Switch on the RG-7.

4 Switch on the connected display.

Turning the Power Off

After use, turn off the power using the following procedure.

1 Turn the volume all the way down on the RG-7.

2 Turn off the RG-7.

3 Turn off the connected display.

■Changing the Display Settings

1.Press the [Function] (Exit) button so the indicator is lit.

2.Press the [Song] (Select -) button or [ ] (Select +) button to display

the EXT DISPLAY screen.

fig.

3. Press the [Song] (Select -) button or [ ] (Select +) button so that the display setting is flashing.

fig.

4. Press the [ ] (Value -) button or [ ] (Value +) button to select “VGA.”

5. Press the [Function] (Exit) button so the indicator goes out.

Images are now displayed in the screen of the connected external display.

When you press the [DISPLAY] button on the remote control, the content being displayed switches to the external display.

To change the settings indicated in the display (Song Select screen → Lyrics screen → Slide show → Notation → Song Select screen...), refer to “Selecting What is To Be Displayed on the External Display or Television” (p. 50).

For more on handling the external display, refer to your display’s owner’s manual.

You can save this setting in the RG-7’s memory using the Memory Backup function (p. 72).

48