Roland RG-7 manual Changing the Infrared Transmission Function Settings, Standby

Chapter 6. Changing Various Settings

Changing the Infrared Transmission Function Settings

Some digital devices equipped with an IrDA (infrared) port are able to transfer song data in SMF format to the RG-7. For more detailed information, refer to the owner’s manual for the digital device.

NOTE

Users are responsible for learning how to use infrared transmissions. The RG-7 is not necessarily compatible with all devices equipped with an IrDA port. Roland cannot answer questions regarding infrared transmissions.

■Switching Infrared Transmissions On and Off

(Infrared Function)

You can set whether to have the song data infrared transmission function on (active) or off (disabled).

→The infrared transmission function is switched on and off together with the remote control’s functions (p. 89). The infrared transmission function is disabled when remote control’s function is turned off.

1.Press the [Function] (Exit) button, getting its indicator to light.

2.Press the [Song] (Select -) button or [ ] (Select +) button to display the REMOTE screen.

3.Press the [Song] (Select -) button or [ ] (Select +) button to get the value for “Receive” to flash.

4.Press the [ ] (Value -) button or [ ] (Value +) button to switch infrared transmission on or off.

Value	Description
On	The song data infrared transmission
	function is enabled.
	The song data infrared transmission
Off	function is disabled. Song data cannot be
	transferred.
	* The included remote control unit is also
	disabled.

5.Press the [Function] (Exit) button so the indicator goes out.

→You can use the Memory Backup function to store these settings to the RG-7 (p. 72).

■Setting Playback After the Song is Transferred

(Infrared Playback)

This sets the RG-7 to play back a song automatically following transfer of the song from the digital device.

You can also set this so that songs are not played back automatically after the song is transferred.

1.Press the [Function] (Exit) button, getting its indicator to light.

2.Press the [Song] (Select -) button or [ ] (Select +) button to display the iR screen.

3.Press the [Song] (Select -) button or [ ] (Select +) button to get the value for “iR Play” to flash.

4.Press the [ ] (Value -) button or [ ] (Value +) button to switch the infrared playback function setting.

Value	Description
Auto	The song is played back automatically after
	the song is transferred.
Standby	Following transfer of the song, the song is
	ready to play but not played back.

5.Press the [Function] (Exit) button so the indicator goes out.

96