
Chapter 1. Playing Back Songs
Using the Aux Input Jack
1. Press the [Function] (Exit) button so the indicator is lit.
2. Press the [Song] (Select ] (Select +) button to display the AUX INPUT screen.
3. Press the [Song] (Select ] (Select +) button to get the value for “Mode” to flash.
fig.
4. Press the [ ] (Value
] (Value +) button to change Aux Input type.
Value: Off, Stereo, Decode
With the factory settings, this is set to “Off.” When set to “Off,” the Aux Input connector cannot be used.
Set this to “Stereo” when using a connected MD player or other such device.
“Decode” is employed when inputting encoded signals; it is not normally used in normal situations.
5. Press the [Song] (Select ] (Select +) button to get the value for “Level” to flash.
fig.
6. Press the [ ] (Value
] (Value +) button to change the Level of the device connected to Aux Input jack.
Value:
*When the level is set to “0,” sounds from the device connected to the Aux Input jack are not played.
7.Press the [Function] (Exit) button so the indicator goes out.
You can save this setting in the
Memory Backup function (p.
72).
36