
Chapter 5. User Program Registration
Saving the User Program Sets
The 36 separate configurations of User Programs registered in the
When saving the settings to USB memory, connect the USB memory to the Ext Memory port (p. 22).
1 Press the [Function] (Exit) button, getting its indicator to light.
2 Press the [Song] (Select ] (Select +) button to display the USER PROGRAM screen.
fig.
3 Press the [Song] (Select ] (Select +) button so “SAVE” is flashing.
fig.
4 Press the [Moving Key] (Enter) button.
The following screen appears.
fig.
5 Press the [Song] (Select ] (Select +) button so that the “User Program save destination” is flashing.
fig.
6 Press the [ ] (Value
] (Value +) button to select the “User Program save destination.”
Display | Description |
|
|
|
|
User Memory | The User Program is saved in User Memory. |
|
|
Ext Memory | The User Program is saved in USB Memory. |
|
|
You can restore the content in the User Memory to the original default factory settings. Refer to “Restoring the Factory Settings (Factory Reset)” (p. 73).
NOTE
Use USB memory available from Roland. Proper operation cannot be guaranteed if other external memory products are used.
81