Chapter 7. Connecting External Devices
■Making the Connections
NOTE
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.
1.Turn the volume all the way down on the
2.Switch off the power to the
3.Use a MIDI cable (sold separately) to connect the MIDI connectors to each other.
Please refer to the connection examples below.
4.Switch on the power to the
5.Adjust the volume level on the
6.You should also set the MIDI settings as needed.
For details on the
Connection Examples:
Setup with a MIDI Sequencer
Roland MT Series
Out MIDI In
Jack Panel of the
*When the
Connecting with a MIDI Sound Module
Sound Module
MIDI
THRU OUT IN
Jack Panel of
the
Making MIDI-related Settings
Here’s how you can set the transmit channel and other MIDI-
related settings.
■MIDI Send Channel Settings
MIDI features sixteen MIDI channels, numbered
The
1.Press the [Function] (Exit) button, getting its indicator to light.
2.Press the [Song] (Select 
] (Select +) button to display the MIDI screen.
3.Press the [Song] (Select 
] (Select +) button to get the value for “Tx Ch” (Transmit channel) to flash.
4.Press the [
] (Value 
] (Value +) button to set the MIDI Transmit channel.
Value:
5.Press the [Function] (Exit) button so the indicator goes out.
