
Maintenance and Operations | Periodic Maintenance |
|
|
|
|
Periodic Maintenance
This section describes the periodic maintenance that must be performed after the
ATM Switch is put into operation.
In general, the following two tasks are required for the operation, maintenance, and management of the ATM Switch:
■Check to make sure that the ATM Switch is operating properly.
■Take action when a fault is found.
The system manager of the ATM Switch should perform the following periodic inspection to make sure that the ATM Switch is operating properly:
■Check visually
■Check with commands
■Diagnose the equipment
In addition, when a fault is detected in the ATM Switch, take appropriate action.
The user does not need to control the equipment once operation begins. The user merely needs to carefully read the Precautions on Handling the Product and the Handling Precautions in the following sections and provide an environment around the equipment so that the ATM Switch can function properly.
When an error occurs to the equipment during operation, the ALARM LED on the front of the equipment will light. In this case, promptly call the system manager.
Centillion 1200N ATM Switch User Manual | |
NTP |
|