Installation

Turning Power On and Off

 

 

 

 

Turning Power On and Off

Connecting the Power Cable

This section describes the procedures for connecting the power cable to the ATM Switch and the procedures for turning the power on and off.

Make sure the power unit fastening screw on the back of the ATM Switch is properly screwed. Connect the power cable to the power connector and the other end of the cable to power supply, for example, the power outlet.

Figure 7-12: Connecting the Power Cable

NOTE DC power cable : White (0V), Brack (-48V), Green(FG)

Since maximum power consumption is large, be sure to draw power directly from an outlet. Never share the same outlet with other devices. Never connect the ground wire to a gas pipe.

Centillion 1200N ATM Switch User Manual

7-15

NTP 297-8103-903

 

Page 85
Image 85
Panasonic 1200N manual Turning Power On and Off, Connecting the Power Cable