Installation | Turning Power On and Off |
|
|
|
|
Turning the Power Off
Power Source
and Power
Consumption
Procedures for turning off the ATM Switch's power are shown below.
1.Turn off the power switch on the back of the equipment. If the power unit is redundant, turn off both power switches.
2.Confirm that the POWER LED and the READY LED in the lower right area of the front of the ATM Switch are off.
All communications will be severed when the power is turned off. All unsaved setting data will also be lost. In principle, do not allow anyone other than the system manager and service personnel to touch the power switch.
To replace one of the power units during operation, only turn off the power of the power unit you wish to replace.
Shown below is the power supply and power consumption of the ATM Switch.
■Input
❑DC
❑Input voltage:
■Maximum power consumption
❑6.0 A
Centillion 1200N ATM Switch User Manual | |
NTP |
|
