
Installation
7
This section describes procedures for installing the ATM Switch.
Move to installation site
Check the contents of the package and move the ATM Switch to installation site or mount on optional chassis.
Connect the cables
Connect the cables (communications power cable and RS 2320 cable) to the ATM Switch. Connect MAT to the other end of the
Turn on the power
Insert the PCMCIA card into the ATM Switch. Turn on the power.
Set data
Set the system configuration data. For details, refer to Command Manual.
Check operation
Run operation test to make sure the ATM Switch is running properly.
Begin operation
Figure 7-1: Procedures for Installing the ATM Switch
Centillion 1200N ATM Switch User Manual | |
NTP |
|