ClearOne comm operation manual XAP 800 Serial commands, Command Function

Appendices ~ Appendix E: Serial Commands				97
XAP 800 Serial commands
Command	Function	Command	Function
AAMB	Selects/reports adapt ambient setting	LOCK	Selects/reports the state of the preset and
AEC	Selects/reports acoustic echo canceller setting		macro lock. When on, the lock prevents presets
AGC	Enable/disables AGC		and macros that have been flagged from being
AGCSET	Selects/reports AGC settings on inputs		altered in any way.
AMBLVL	Selects/reports ambient level	LOCKPRST	Selects/reports whether the lock is applied to a
BAUD	Selects/reports the baud rate of the serial port		preset or macro. If a preset or macro has the
CGROUP	Selects/reports compressor group setting		lock applied, it can only be changed if the unit
CHAIRO	Selects/reports chairman override setting		is unlocked with the password.
COMPRESS	Sets/reports compressor on audio processing	LOCKPWD	Selects/reports the password for the
	channel		preset/macro lock. This can only be changed if
COMPSEL	Selects/reports compressor activity for		the unit is unlocked.
	processor	LMO	Selects/reports Last Mic On mode
DECAY	Sets/reports decay rate	LVL	Reports in, out, or processor level
DELAY	Sets/reports delay rate	LVLREPORT	Selects/reports level status
DELAYSEL	Selects/reports processor channel delay	LVLRRATE	Sets the level report rate for the unit
DFLTM	Sets/reports default meter	MACRO	Executes macro or reports last macro
DID	Selects/reports device ID		executed
DSPVER	Reports DSP firmware version	MASTER	Reports the mode of the unit
FILTER	Selects/reports input/processor channel filter	MAX	Changes/reports max gain setting for in, out,
	setting		processor block
FILTSEL	Enables/disables filters on input/processor	MDMODE	Enables/disables the modem mode for the unit
	channel	MIN	Changes/reports minimum gain setting for in,
FLOW	Selects/reports the flow control of the serial		out, processor block
	port	MINIT	Sets/reports modem initialization string of
FMP	Sets/reports 1st Mic Priority for mic gating		serial port
	group	MINMAX	Changes/reports min and max gain from in,
FPP	Sets/reports current passcode setting		out, processor block
GAIN	Changes/reports gain for in, out, or process.	MLINE	Selects/reports coarse gain adjustments on
GATE	Reports gate status of channels 1–8		Inputs 1–8
GHOLD	Selects/reports hold time setting	MMAX	Selects/reports max # of mics for each mic
GMODE	Selects/reports gating mode setting		group
GOVER	Selects/reports gating override setting	MPASS	Sets passcode setting when using modem
GRATIO	Selects/reports gate ratio setting		mode
GREPORT	Selects/reports gate status report frequency	MTRX	Selects/reports matrix routing of an in. to out.
GRPSEL	Selects/reports input gating group assignments	MTRXLVL	Selects/reports matrix level at the cross point
LABEL	Selects/reports label of specified channel	MUTE	Sets/reports mute status
LFP	Sets/reports status of front panel access	NCD	Selects/reports noise cancellation amount for
			each mic channel

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760