![](/images/new-backgrounds/1330638/330638251x1.webp)
Appendices ~ Appendix E: Serial Commands | 119 |
MUTE - Mute
This command selects/reports the setting of mute on input, output or processing channels.
Command form: DEVICE MUTE <Channel> <Group> [Value]
Argument details
Name | Description |
Device | |
MUTE | Command form |
Channel | See Groups and Channels, page 97 |
Group | I, O, M, P, L |
Value | 0 = Off, 1 = On, 2 = Toggle, Null = current mode |
Example: #51 MUTE 2 M 1 On XAP 800 unit 1 (#51), the mute (MUTE) for
mic (M) channel 2 is on (1).
NCD - Noise Cancellation Depth
This command selects/reports the noise cancellation amount for each mic channel. Command form: DEVICE NCD <Channel> [Value]
Argument details
Name | Description |
Device | |
NCD | Command form |
Channel | |
Value | 6 - 15 (set noise cancellation from 6 to 15dB), |
| Null to return the current mode |
Example: #52 NCD 1 9 On XAP 800 unit 2 (#52), the noise cancellation depth (NCD) of mic channel 1 is 9dB.
NCSEL - Noise Cancellation Select
This command selects/reports the Noise Cancellation for each mic channel. Command form: DEVICE NCSEL <Channel> <Value>
Argument details
Name | Description |
Device | |
NCSEL | Command form |
Channel | |
Value | 0 = Off, 1 = On, 2 = Toggle, Null = Current state |
Example: #53 NCSEL 2 1 On XAP 800 unit 3 (#53), the noise cancellation (NCSEL) for mic channel 2 is enabled (1).
✍
quality.
Noise cancellation must be enabled for this command to have any effect on audio