HP 800 manual Cancel key to continue

Introduction		Media & Ink	Solutions		Front Panel	Printer	Other	Index
						Options
The Front Panel			Menu Structure		Navigating the Menu System		Message Descriptions
				Front Panel Messages (Continued)
		Message			Explanation and Action
	Install missing cartridges			You are replacing printheads, but the printer has detected that one
	before replacing printheads			or more cartridges are missing. The missing cartridges must be
				installed before the printheads are replaced.
				Follow the procedure for Printhead Replacement. Press the Enter or
				Cancel key to continue.
	Open window and check			You have replaced one or more printheads and the printer’s check
	printhead cover is properly			has found that the printhead cover is not securely closed.
	closed			Open the window and check the printhead cover. The procedure is
				described in the Printhead Replacement procedure.
				Note: This message may also appear following a paper jam, as the
				printer cannot detect the exact reason for the problem. In this case
				you may have to resort to powering off the printer or even removing
				the power cable from the machine, in order to recover from the
				problem. See Clearing a Media Jam.
	Open window and check			During system start-up, which occurs when you first install the
	proper installation of setup			printer, you need to install the setup printheads. These special
	printheads			printheads cannot be used for printing, but must be used when the
				printer has been powered off. The printer has detected that the
				setup printheads have not been installed correctly.
				Open the window and follow subsequent instructions to reinstall or

relocate the setup printheads. Contact HP for advice if the setup printheads are missing or cannot be installed correctly.

￿

For more Messages, click on the Next Page button