HP 800 manual Warped Lines

Marks or scratches on glossy paper after printing

For details of drying time adjustments, see Ink System.

Blurred Lines (Ink “Bleeds” from Lines)

Introduction	Media & Ink	Solutions	Front Panel	Printer	Other	Index
				Options
Solving Problems	Image Quality	Ink Supply	Media Problems	Image Error	Other Problems	Getting Help
	Problems	Problems

Warped Lines

•	The media itself may be warped. This can happen if it has been used or not be stored in the environment condi-
	tions.
•	For all environmental specifications, see Enviromental Specifications.
		￿

• Perhaps you have adjusted the drying time in the front-panel menu to speed up the printer output. Set “Drying time” to “Automatic”.

Glossy paper may be extremely sensitive to the bin or anything that it comes into contact with directly after printing. This will depend on the amount of ink printed and the environmental conditions that are present at the time of printing. Avoid any contact with the paper and handle the print with care until quite some time has elapsed.

NOTE: Included with HP media is a book “Printer Tips” that includes a section on troubleshooting paper problems.