HP 800 manual Removing jammed paper

Off.

that the type of paper is supported by the printer.

10. Wait for the printer to finish initializing.

9. Close the window and switch on the printer.

hands.

Introduction	Media & Ink	Solutions	Front Panel	Printer	Other	Index
				Options
Solving Problems	Image Quality	Ink Supply	Media Problems	Image Error	Other Problems	Getting Help
	Problems	Problems

Removing jammed paper (Continued)

CAUTION: The area where the printhead carriage is parked can￿get quite dirty; be careful not to get ink on your

11. Press the Form Feed and Cut key on the front panel to eject any small pieces of paper that are still in the paper path.

12. Reload the paper as normal (see Loading Roll Media and Loading Sheet Media). If you are using roll paper you may need to trim the edge first, to ensure that it is straight.

NOTE: If there is still paper left in the paper path, try loading a sheet of stiff or rigid paper into the printer, such as heavy coated or matte film; this will help to force out any paper jammed in the paper path.

13. If the cutter seems to be causing the problem, check in the User’s Reference Guide on the Using Your Printer CD

Try disabling the cutter from the front panel; use → Cutter →

You are strongly recommended to align the printheads (see Printhead Alignment) after clearing a paper jam, as the problem may have caused the printheads to be misaligned.

Back …