Introduction

Media & Ink

Solutions

Front Panel

Printer

Other

Index

Options

 

 

 

 

 

 

 

 

 

 

 

The Front Panel

Menu Structure

Navigating the Menu System

Message Descriptions

 

 

 

 

 

Front Panel Messages (Continued)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Message

 

 

Explanation and Action

 

 

 

 

 

 

 

 

 

 

 

 

Printheads not aligned

 

You have replaced one or more printheads but the printer has

 

 

 

 

Paper too small

 

detected that you do not have wide enough paper loaded for the

 

 

 

 

to align printheads

 

alignment process.

 

 

 

 

 

 

Press ENTER to continue

Press the Enter key to load larger paper, or the Cancel key to stop

 

 

 

 

 

 

the load process.

 

 

 

 

 

 

 

 

 

 

 

 

PRINTHEADS not functional

The printer is attempting to print a job, but finds that there is a

 

 

 

 

 

Replace printheads

 

problem with the printheads. You may either replace the printheads

 

 

 

Cancel print

 

at this stage or cancel the print.

 

 

 

 

 

 

 

 

Select the required option and press the Enter key. If you decide to

 

 

 

 

 

replace them, you will be told which ones are failing or missing.

 

 

 

 

 

 

 

 

 

 

Printheads require alignment.

The printer has detected that the printheads need to be aligned.

 

 

 

 

Load paper and select Align

Press the Enter key to continue. Load a sheet or roll of paper, and

 

 

 

printheads.

 

select Align printheads from the Ink menu. See Printhead

 

 

 

 

Press ENTER to finish

 

Alignment.

 

 

 

 

 

 

 

 

 

 

 

 

Printheads require alignment.

The printer has detected that the printheads need to be aligned.

 

 

 

 

Press ENTER to align

 

Press the Enter key to align them. See Printhead Alignment.

 

 

 

 

 

 

 

 

 

 

 

Problem found during

 

A general problem was found during the Advance Calibration

 

 

 

 

calibration

 

routine.

 

 

 

 

 

 

 

 

 

 

Respond to any other messages that appear on the front panel,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

indicating ink or paper problems, and then retry the Advance

 

 

 

 

 

 

 

calibration routine.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

￿

For more Messages, click on the Next Page button

Page 140
Image 140
HP 800 manual Calibration routine