Introduction | Media & Ink | Solutions | Front Panel | Printer | Other | Index | |
Options | |||||||
|
|
|
|
|
| ||
Media Choice | Roll Media | Sheet Media | Ink System | Ink Cartridges | Printheads | ||
Color Calibration
You can calibrate the ink system for the specific media loaded in your printer. Doing this ensures the printed output
matches the colors of the original image as closely as possible. The printer stores the calibration data for each type of media you have calibrated it for since it was powered up. Once the printer has been powered down the next time you use it only the last calibration made will be available and it will print using this calibration data.
To color calibrate your printer, first make sure you have the correct type of media loaded and then make the following front panel selections:
| Select (using the |
| keys) | Then Press: |
|
| |||
|
|
| ||
|
|
| ||
|
|
|
|
|
1. | Ink | Enter | ||
2. | Color calibration | Enter | ||
3. | Calibrate Paper | Enter | ||
The printer prints a calibration pattern and scans it to create the calibration data for the type of media loaded. If you want to check the color calibration status of your printer, make the following front panel selections:
| Select (using the |
| keys) | Then Press: |
|
| |||
|
|
| ||
|
|
| ||
|
|
|
|
|
1. | Ink | Enter | ||
2. | Color calibration | Enter | ||
3. | Status | Enter | ||
The front panel display shows what types of media the ink system is currently calibrated for.
To remove all the calibrations and reset the printer to its factory values choose
Color calibration > Reset from the Ink menu.
