HP 800 manual Setting up the I/O Card, Network

To Change the I/O Time-out Setting

Introduction Media & Ink		Solutions	Front Panel	Printer	Other	Index
				Options
Page Format	Setting Page Size in the		Image Appearance	Print Management		Printer Configuration
		Front Panel
Setting up the I/O Card

Network

With a network interface (such as the HP JetDirect Print Server), refer to your network interface documentation for advice on any front-panel configuration. The front-panel menu is I/O Setup > Card Set-up.

Some software applications do not write a file terminator at the end of a file. In this case, the printer does not know when the file is complete and will wait for more data until the end of the “I/O Time-out” period. By default, this period is 30 minutes. You can change the time-out setting in the front-panel menu (Set-Up > I/O setup > I/O Timeout) to as little as 30 seconds.

￿