HP 800 manual Check that the paper is not a roll

Introduction			Media & Ink	Solutions		Front Panel	Printer	Other	Index
							Options
	The Front Panel			Menu Structure		Navigating the Menu System		Message Descriptions
					Front Panel Messages (Continued)
			Message			Explanation and Action
		Sheet not loaded			The printer is trying to perform a scan of the calibration pattern, but
		Load sheet with printed			no sheet was found.
		pattern			Load the sheet that was printed by the Create pattern part of the
					calibration routine.
		Sheet too long			You have requested the printer to load a sheet of paper, but the
		Please check it is not a roll			sheet appears to be too long.
		Press ENTER to retry			Check that the paper is not a roll.
		Press CANCEL to abort			Either: Press the Enter key to try to load the sheet again;
					Or: Press the Cancel key to stop the process. If the paper is on a
					roll, follow the instructions in Loading Roll Media.
		Troubleshooting finished			The printer has finished the Troubleshooting routine and will not at
		Resume normal printing			this stage perform further cleaning on the printheads because this
		If problem persists select			could damage the other ones. However, according to the evaluation
		Troubleshooting again			you have given, the printheads require cleaning because there are
		Press ENTER to continue			defects in the Diagnostic Print.
					Press the Enter key. Then resume your normal printing activities. If
					the problem recurs, try using the Troubleshooting routine again, or
					select Replace Printheads from the front panel (in the Ink System
					menu) to replace the printheads that are faulty.
		Troubleshooting requires			The Troubleshooting utility has found that there is no paper loaded in
		paper for a diagnostic print.			the printer.
					Load a roll of paper.

￿

For more Messages, click on the Next Page button