HP 800 manual Starting to Print a File that is Waiting for a Time-out

– Press the Cancel key and re-send the job with paper that you have available.

Introduction	Media & Ink	Solutions	Front Panel	Printer	Other	Index
				Options
Page Format	Setting Page Size in the		Image Appearance	Print Management		Printer Configuration
		Front Panel

Starting to Print a File that is Waiting for a Time-out

If all is in order (paper loaded, all ink components installed, and no file errors), there are still reasons why a file you have sent from your computer may not start printing when expected:

• The print file may lack a proper file terminator and the printer is therefore waiting for the specified I/O time-out period before assuming it is complete. See To Change the I/O Time-out Setting.

• Nesting may be on and the printer is waiting for the specified nest wait time-out period before calculating the appropriate nests. In this case, the printer display shows the remaining time for the nesting time-out. See How Long does the Printer Wait for Another File?.

• If your file has selected sheet or roll paper to print the job onto, but the selected paper is not loaded into the printer:

– the front panel will prompt you to load the selected paper, once you load the paper the printer will print the job.

If you want to override the time-out period and start printing, press Form Feed and Cut on the front panel.

￿

Form Feed

and Cut Key