HP 800 manual Calibration

Introduction			Media & Ink	Solutions		Front Panel	Printer	Other	Index
							Options
	The Front Panel			Menu Structure		Navigating the Menu System		Message Descriptions
					Front Panel Messages (Continued)
			Message			Explanation and Action
		Option not available now			You have selected an option in the menu that is not available at the
					moment. (The printer may be busy, out of ink, out of paper, etc.)
		Out of paper			The printer ran out of paper while printing the calibration pattern.
					Load a sheet or roll that is at least 65 cm (25 inches) long and 50 cm
					(20 inches) wide.
		Paper advance calibration is			You are recommended to perform the Advance calibration routine, to
		recommended.			ensure the optimum print quality.
		Press ENTER to calibrate			Press the Enter key to create the calibration pattern. See Advance
					Calibration.
		Paper advance calibration is			You are recommended to perform the Advance calibration routine, to
		recommended. Load paper			ensure the optimum print quality.
		and select Paper advance			Load a sheet or roll of paper and then select Advance calibration
		calibration.			from the Paper menu. See Advance Calibration.
		Press ENTER to finish
		Paper loaded with too much			During the loading of paper, the printer has detected that the paper
		skew			is skewed too much, that is, it has not been loaded straight enough.
		Press ENTER to retry			(‘Skew’ is the angle between the actual paper edge and the correct
		Press CANCEL to abort			line.)
					Either: Press the Enter key to restart the loading procedure;
					Or: Press the Cancel key to cancel paper loading.

￿

For more Messages, click on the Next Page button