205
10 PGL Barcodes

PGL Barcodes (Used in CREATE Mode Only)

PGL incorporates several barcode styles in its comm and set. Most barcodes
use the same basic set of parameters. Barcode commands follow the same
requirements as other PGL commands as far as how they are entered, ability
to change orientation of printer output, adjust darkness of outpu t, etc. They
can also be printed in incremented format.
For this section of the manual we first explain all of the barco de parameters,
followed by a table showing which parameters each barcode uses. After the
table we present the exceptions for each barcode and how to increm ent
barcodes.
NOTE:

Barcode Command Parameters

BARCODE
This is the Barcode Command. It notifies the printer that the da ta stream that
follows is to be used to format and define a specific barcod e type.
Enter: BARCODE
Name/CD
This parameter specifies the type of barcode that will be printed. Table 38 on
page 206 lists barcodes that PGL can print and how the y should be entered.
= Alphanumeric text string delimiter.
; = Parameter delimite r.