49
3Creating Lines And

Graphics

Line Drawing

Code V allows printing of solid or dashed lines of various thickne sses and
orientations. The following sections describe the line drawing commands and
their usage.
Solid Lines
Description Solid line s can be printed horizontally and vertically ranging in
width and length from one dot to 13.2 inches. The solid line
command is:
Command ^LShhhdvvvd
Arguments
^LS Solid Line command
hhh The horizontal dimensions, specified in increments of 0.1 in ches
(0.25 cm), ranging from 000 to 132 (0 to 13.2 inches or 0 to
33.6 cm).
d Addition al dot columns, ranging from 0 to 9 dot-columns.
vvv The vertical d imensions, specified in increments of 0.1 inches
(0.25 cm), ranging from 000 to 132 (0 to 13.2 inches or 0 to 33.6
cm).
d Addition al dot columns, ranging from 0 to 9 dot-columns.
NOTE: The length and thickness of a line must be at least one dot.