Tally Genicom 6600 manual Stepmask

EXECUTE Mode (Normal)

Table 17. EXECUTE Form Command Optional Parameters

Field		Function	Option/Modifier Selections
idir;	Optional field specifying whether		Enter a plus sign +; or leave this field blank
	the data field will be incremented or		to increment in a positive direction.
	decremented.		Enter a minus sign -;to decrement the
			data.
STEPMASK;	This parameter is the increment		See the previous explanation on
	information field that defines the		Incremented Static Alphanumeric Strings
	number of character positions in		for how to construct the STEPMASK
	the data field, the increment		parameter.
	amount for each position, and
	which positions will be
	incremented.
RPTn;	Optional parameter that specifies		Enter RPT followed by a numeric value
	the number of times this field value		from 1 to 65,535, then the parameter
	is repeated before it is		delimiter. The default repeat amount is 1,
	incremented.		which means that if you do not enter this
			parameter or enter only 1, then the field
			will be incremented each time it prints.
RSTn;	Optional parameter that specifies		Enter RST followed by a numeric value
	the number of times this		from 1 to 65,535, then the parameter
	incremented field will print before it		delimiter. The default reset value is 0,
	is reset to the starting point.		which means that the field will not be
			reset..
	This parameter defines the ASCII		See the explanation on Incremented Static
	character string that will be printed		Alphanumeric Strings for how to construct
	in the specified location.		the starting field.
			Enter the delimiter followed by the
			alphanumeric string and end the entry with
			the data delimiter.
			NOTE: The delimiter cannot be used in
			the alphanumeric string.

The following parameters are used in forms where Incremental Dynamic Barcode Data fields have been defined. You may enter as many of the following fields as were originally defined on the form.

￿IBFn;	Optional parameter that specifies	Enter the Special Function Control
	one of the previously defined	Character followed by IBF, then by the
	Incremental Dynamic Barcode	assigned number of the desired Barcode
	Data fields.	Data Field. End the entry with the
		parameter delimiter.
idir;	Optional field specifying whether	Enter a plus sign +; or leave this field blank
	the data field will be incremented or	to increment in a positive direction.
	decremented.	Enter a minus sign -;to decrement the
		data.

175