Tally Genicom 6600 manual Half-Dot Mode Double Density, Half-Dot Mode And Half-Tones, Graphic

Chapter 2 Half-Dot Mode (Double Density)

Half-Dot Mode (Double Density)

The Half-Dot Mode causes the printer to print at 120 DPI horizontally (the standard print density is 60 DPI). Printing at 120 dpi results in darker printing and reduces the stairstep effect of diagonal lines. It is most often used to improve barcode readability. The Half-Do Mode can be toggled ON and OFF within a Graphics Pass using the command:

Command ^KF<data>^KF

Arguments

^KF	Toggles Half-Dot Mode ON.
<data>	Data to be printed in Half-Dot Mode.
^KF	Toggles Half-Dot Mode OFF.

Example: Half-Dot characters can be mixed with regular characters. The Graphics Pass ^M0303000^KFHALF-^KFDOT MODE^- prints:

^KF	Turns ON Half-Dot Mode.
HALF	Data to be printed in Half-Dot Mode.
^KF	Turns OFF Half-Dot Mode.

DOT MODE Data to be printed in regular density.

Half-Dot Mode And Half-Tones

Half-Dot mode (Double Density) can be intermixed with half-tones to produce a greater variety of shades.

Example: The Graphics Passes ^M0303000^KLEAGRAPHIC^KH^

^M0303040^KH^KFOPTION^KF^KH^- prints:

•First Graphic Pass - ^M0303000^KLEAGRAPHIC^KH^

^KL	Turns ON Half-Tone Mode.
EA	Selects EA half-tone pattern.
GRAPHIC	Data printed in the selected pattern.
^KH	Turns OFF Half-Tone Mode.

36