Tally Genicom 6600 manual

Chapter 9 PGL Commands

	Table 17. EXECUTE Form Command Optional Parameters
Field	Function	Option/Modifier Selections

EVFU Data	Optional parameter that downloads
	the EVFU channels (lines) where
	Overlay data will be entered.
	You cannot mix line spacing on
	forms that use an EVFU program.
	Otherwise, the EVFU form is
	removed from memory. EVFU
	cannot exceed the physical length
	of the page. If it does the printer
	returns to Normal mode.

Enter the Form Definition Sequence. Refer to your Operator/Application Manual for information on composing the download sequence.

The following parameters are used informs where Dynamic Alphanumeric Data Fields and Barcodes have been defined. You may enter as many of the following fields as were originally defined on the form.

￿AFn;	Optional parameter that specifies
	one of the previously defined
	Dynamic Alphanumeric Data fields.

Enter the Special Function Control Character followed by AF, then the assigned number of the desired Alphanumeric Data Field. End the entry with the parameter delimiter.

The ASCII character string that will be printed in the specified location.

￿BFn;	Optional parameter that specifies
	one of the previously defined
	Dynamic Dynamic Barcode Data
	fields.
	The barcode data that will be
	printed in the specified location.

Enter the data parameter delimiter followed by the alphanumeric string and end the entry with the data parameter delimiter.

NOTE: The delimiter cannot be used in the alphanumeric string.

Enter the Special Function Control Character followed by BF, then by the assigned number of the desired Barcode Data Field and end the entry with the parameter delimiter.

Enter the data parameter delimiter followed by the barcode data string and end the entry with the data parameter delimiter.

The following parameters are used in forms where incremental Dynamic Alphanumeric Data fields have been defined. You may enter as many of the following fields as were originally defined on the form.

￿IAFn;	Optional parameter that specifies
	one of the previously defined
	Incremental Dynamic
	Alphanumeric Data fields.

Enter the Special Function Control Character followed by IAF, then by the assigned number of the desired Incremental Alphanumeric Data Field. End the entry with the parameter delimiter.

174