Tally Genicom 6600 manual Stepmask

Chapter 9 PGL Commands

	Table 17. EXECUTE Form Command Optional Parameters
Field		Function	Option/Modifier Selections
STEPMASK;	This parameter is the increment		See the previous explanation on
	information field that defines the		Incremented Static Alphanumeric Strings
	number of character positions in		for how to construct the STEPMASK
	the data field, the increment		parameter.
	amount for each position, and
	which positions will be
	incremented.
RPTn;	Optional parameter that specifies		Enter RPT followed by a numeric value
	the number of times this field value		from 1 to 65,535, then the parameter
	is repeated before it is		delimiter. The default repeat amount is 1,
	incremented.		which means that if you do not enter this
			parameter or enter only 1, then the field
			will be incremented each time it prints.
RSTn;	Optional parameter that specifies		Enter RST followed by a numeric value
	the number of times this		from 1 to 65,535, then the parameter
	incremented field will print before it		delimiter. The default reset value is 0,
	is reset to the starting point.		which means that the field will not be
			reset..
	This parameter defines the starting		Enter the delimiter followed by the barcode
	incremental bar code field.		data string and end the entry with the data
			delimiter. See the previous explanation on
			Incremented Static Alphanumeric Strings
			for how to construct the starting field. Also
			see the information on individual barcodes.

If you are using interactive EXECUTE Mode, use the following code to initiate printing.

Overlay Data Overlay data can be entered while in EXECUTE mode onto predefined forms. It is variable interactive Alphanumeric data that is entered into predefined locations by using tabs and spaces to position it horizontally and Line Feeds, Form Feeds, and EVFU programs to position it vertically. Paper Movement Comamnds initiate printing of the buffer contents.

Enter tabs, spaces, line feeds, form feeds, and EVFU channel selections to position the data then enter the data string.

Refer to your Operator/Application Manual for information on EVFU operations.

Form Feed	This command is used to print the
	remainder of the current form and
	move the print location to the top of
	the next form.
	When you use this command the
	EVFU program remains the same.

Enter Form Feed Command.

Use the following commands to initiate printing of the last form and leave EXECUTE Mode.

176