Tally Genicom 6600 manual Scale Command Create, Dot, Character Scale Placement

Scale Command (Create)

Scale Command (Create)

There are two commands that define the format that will be used in specifying where various elements of the form will be placed.

Table 36. Scale Command

Field	Function	Option/Modifier Selections
Dot Scale Placement
SCALE;	Command Specifier.	Enter SCALE;
DOT	Specifies that placement will be	Enter DOT to specify a dot measurement
	done using a dot-scale.	scale (dot-columns and dot-rows).
Character Scale Placement
SCALE;	Command Specifier.	Enter SCALE;
CHAR	Specifies that placement will be	Enter CHAR; to specify a character
	done using a character scale.	measurement scale (columns and rows).
;LPI	An optional parameter that can be	Selections that can be used are 6, 8, 9,
	used to specify Lines Per Inch	and 10. No value will result in the default
	setting for print output.	setting of 6 LPI. Do not forget the
		parameter delimiter.
;CPI	An optional parameter that can be	Selections that can be used are 10, 12, 13,
	used to specify Character Per Inch	15, and 17. No value will result in the
	setting for print output.	default setting of 10 LPI.

199