Tally Genicom 6600 manual Reverse Image, Revese Image Descender Mode

Revese Image Descender Mode

Reverse Image

Reverse Image causes the printer to print white block characters on a black background. The black background extends beyond each character one dot row or column for every 0.1 inch increment of character window size. For example, a Reverse Image character window with a horizontal dimension of 03 (0.3 inches or 0.76 cm) and a vertical dimension of 04 (0.4 inches or 1.0 cm) will have the dark background extend three dot columns left and right of the character(s) and four dot rows on the top and bottom.

The Reverse Image Command is valid only if it is within a Graphics Pass. If it is outside of a Graphics Pass, it is interpreted as a Repeat Command. If the Graphics Pass is terminated while Reverse Image is ON, Reverse Image is automatically terminated.

Command ^R<data>^R

Arguments

^R	Turns ON Reverse Image.
<data>	Data to be printed in Reverse Image.
^R	Turns OFF Reverse Image.

Example 1: Sending ^M0202000^RGRAPHICS^- prints:

Example 2: Sending ^M0202000^ROPT^RION^- prints:

NOTE: The reverse image characters are a few dots lower.

Revese Image Descender Mode

If Descender Mode (^D) is turned on with Reverse Image on, the entire dark background extends down to encompass the descenders.

Example 1: Sending the Graphics Pass ^M0303000^Rfghij^R^- with

Descender Mode OFF prints:

33