Descender (Descndr) Parameter (Menu Level 2)
295
Descender (Descndr) Parameter (Menu Level 2)
This parameter controls insertion of the character descende r gap between
print lines.

Descndr Selections (Menu Level 2)

Fixed: The descender gap is always inserted after the line regardless
of the setting of Descender Mode (Default selection).
Auto: The descender g ap is only inserted after lines containing
characters with descenders.
Zero Parameter (Menu Level 2)
As an aid in distinguishing zeros from the upper-case letter O yo u can choose
to have your zeros slashed (Ø).

Zero Selections (Menu Level 3)

Open (O)
Slashed (Ø) (Default selection)
Vscale Parameter (Menu Level 2)
This parameter determines whether vertical block characters will be s caled to
the same dimensions as horizontal block characters.

Vscale Selections (Menu Level 3)

OFF
ON (Default selection)
PGL Special Function Command Character (SFCC) Parmeter (Menu Level 2)
This parameter allows you to change the SFCC. The defa ult for this
parameter is the ASCII tilde (~, Decimal 126, HEX 7E) characte r. This
parameter is only applicable to the PGL Graphics opti on. (See “Change
SFCC Command (Normal and Execute)” on page 182.

SFCC Selections (Menu Level 3)

1-255 (Decimal designators for ASCII characters).