Tally Genicom 6600 PDF, LOC (Location of Human Readable Characters), FONT, STOP

Barcode Command Parameters
209
PDF
Optional parameter that manipulates printing of human reada ble characters
when it is present. In UPC and EAN barcode this parameter is not necess ary
to print human-readable characters (human readable characters are the
default condition for these barcodes).
Enter: PDF
NOTE: Do not use this parameter if a null data field is specified.
LOC (Location of Human Readable Characters)
Optional parameter that changes the location of the human rea dable
characters.
Enter: No value or B to cause human readable characters to print below the
barcode.
Enter: A to cause human-readable characters to print above th e barcode.
FONT
Optional parameter that selects a font for the human readable ch aracters or
suppress printing of human readable characters and tr ailing portions of the
barcode.
Enter:
N = 10 CPI ASCII
O = 10 CPI OCR-A
X = 10 CPI OCR-B
S = Suppress printing the human readable characters a nd trailing portions of
the barcode.
Examples:
PDF;A;X Selects human readable characters above the barcode in 10 CPI
OCR-B.
PDF;S Suppress es printing of human readable characters in the
barcode.
STOP
This parameter ends the Barcode Command. The printer remain s in Create
Mode.
Enter: STOP
This must be present at the end of each individual barcode. For e very
BARCODE command you must have a STOP command.