Tally Genicom 6600 manual Change Sfcc Command Normal and Execute, PGL Commands Field

Chapter 9 PGL Commands

Field

￿SFCC;

n

Change SFCC Command (Normal and Execute)

This command allows you to change the current/default Special Function Control Character to one of your choosing. SFCC command characters may be selected from ASCII characters in Hex address 00-FF. The SFCC command is:

Table 21. Change SFCC Command

Function	Option/Modifier Selections
Special Function Control Character	Enter the current Special Function Control
(SFCC)	Character followed by SFCC, then end the
	entry with the parameter delimiter.
Designates the new SFCC	Enter desired ASCII character in decimal
Command Character.	format. The valid range of values is from
	0 - 255.
	You may also use the optional method of
	actually specifying the desired character, if
	it is a printable character, by using the
	format ‘n’ to designate the character. If you
	use this method enter the desired printable
	character between single quote
	characters.

NOTE: In addition to being able to change the SFCC using this command we have added the ability to change it through the printer control panel. The SFCC Parameter is located in the Configurations Menu.

Example: To change the SFCC from the default character (~, tilde) to the @ character use either the following commands:

182